Speedwheel Vespa GTS Tuning

10km/h faster without changing anything on the Vespa GTS engine?

SPEEDWHEEL – Ingenious tuning part for more top speed from KÜBLER RACING for Vespa GTS HPE 300 models (from 2019)

10km/h higher top speed with your Vespa GTS 300 without changing anything at the engine?
With the changed Tonrad SPEEDWHEEL from Kübler Racing this is quite simply possible .
The tone wheel is a slotted steel disc on the rear wheel.
This is used to determine the wheel speed for the ASR/ABS control.

  • Plus 10km/h Final speed
  • No intervention in the motor required
  • No problems with retrofitting
  • Not visible from the outside
  • No increased wear

Speedwheel Vespa GTS Tuning

Order here +10km/h Vmax

REVERATING SPEED LIMITER

Although the Vespa GTS HPE has more power at the rear wheel than its predecessors, the top speed unfortunately does not benefit from it due to an early onset speed limiter. This is partly due to the slightly faster speedometer display. At a real 120km/h the speedometer shows 130km/h already.
From speedometer 130km/h on, however, the on-board electronics regulate consistently.

FINAL SPEED

This is exactly where the new tonewheel from Kübler Racing comes in. What sounds like magic at first is ultimately simple physics. The new tonewheel has a modified geometry which now transmits the exact, real speed to the control electronics. Now the indicated 130km/h are also real 130km/h on the road. The speed limiter therefore also reaches a full 10km/h later, although the speedometer shows as much as before the conversion (130km/h).

Ideally the higher final speed can be confirmed by a comparison with a GPS speed measurement (e.g. via mobile phone) before and after the conversion.
In the stored performance diagram you can see the difference between how much km/h the speed limiter reaches before and after the conversion:

Leistungsdiagramm Speedwheel Vespa GTS

ASSEMBLY & ASR RECALIBRATION

The exhaust and the swingarm on the right side of the vehicle (in the direction of travel) are dismantled for retrofitting. After the simple exchange of the tonewheel (screwed to the rear wheel rim / by 5pcs. M6x20 hexagon socket screws) only the ASR system is recalibrated, that’s all. The ASR recalibration can be easily done by yourself using our manual.

Order your Speedwheel here!

 

 

Vespa PX Rahmentausch

LML frame Completely painted body set for Vespa PX frame exchange

We offer you a complete frame set from LML with all necessary body parts, for Vespa PX. Vespa PX frame exchange made easy: all parts are already painted at the factory.

These sets are LML – licensed buildings. Of course, there can be a small flaw in this. We offer these LML frames for Vespa in a special cheap set with all painted parts.

Buy LML frame set for Vespa PX frame exchange here

LML Rahmen Set für Rahmentausch Vespa PX

 

LML frame set for Vespa PX frame exchange

The Vespa-Youtuber Kevin, from the PX-Garage Nienburg / Savage Scooters, got this frame as a replacement for a warped and rusted through Vespa PX frame. In this video he unpacks our LML frame set and shows you the quality and also the final result, which is quite impressive:

PX Garage Nienburg | PX 200 Rahmen Set | LML Rahmenset B-Ware

 

Buy LML frame set for Vespa PX frame exchange here

 

VESPA GTS LEDE SCHEINWERFER MOTONOSTRA

LED Spotlight Vespa GTS by MOTO NOSTRA

Our super LED headlights Vespa GTS with approval came today and are now available again. Take the opportunity now:

Buy LED spotlights for your GTS here

LED headlight with E-marking and high-intensity main beam/dipped beam. An additional feature is a separately switchable position light!

Ulf shows you the headlight for your GTS here in the video:

MotoNostra LED Scheinwerfer Vespa GTS LED Scheinwerfer nachrüsten
Buy LED spotlights for your GTS here

 

Gepäckträger Vespa

Summer time is travel time – use a luggage rack now

Just in time for the summer holidays, the popular luggage racks from FA Italia are now available.

Folding luggage racks are simply hung at the top of the leg shield and fixed on the sides with the enclosed tensioning screws. This makes it easy to stow bulky luggage. Before the trip, the load is secured with the help of our tension straps and lashing straps – and the tour can start.

When not in use, the carrier can be removed in no time at all. But it’s better to leave it on, because you certainly don’t have to hide the great carriers!

Luggage rack for your scooter

We have luggage racks for almost every vehicle from different manufacturers available, the black ones from FA Italia were not available for a long time and are now available again:

Luggage carrier folding front -FA ITALIA close fitting – black

3331498 | Suitable for almost all classic Vespa and Lambretta models:

Fits the following models
  • Eibar Lambretta LI 125 (Serie 2)
  • Eibar Lambretta LI 150 (Serie 2)
  • Eibar Lambretta TV 175 (Serie 2)
  • Innocenti Lambretta DL 125 (GP 125)
  • Innocenti Lambretta DL 150 (GP 150)
  • Innocenti Lambretta DL 200 (GP 200)
  • Innocenti Lambretta LI 125 (Serie 1)
  • Innocenti Lambretta LI 125 (Serie 2)
  • Innocenti Lambretta LI 125 (Serie 3)
  • Innocenti Lambretta LI 125 Special (LIS 125)
  • Innocenti Lambretta LI 150 (Serie 1)
  • Innocenti Lambretta LI 150 (Serie 2)
  • Innocenti Lambretta LI 150 (Serie 3)
  • Innocenti Lambretta LI 150 Special (LIS 150)
  • Innocenti Lambretta TV 175 (Serie 1)
  • Innocenti Lambretta TV 175 (Serie 2)
  • Innocenti Lambretta TV 175 (Serie 3)
  • Innocenti Lambretta TV 200
  • Innocenti Lambretta SX 150 (X 150 Special)
  • Innocenti Lambretta SX 200 (X 200 Special)
  • Serveta Lambretta Lince 125
  • Serveta Lambretta Scooterlinea 125
  • Serveta Lambretta Special 125
  • Serveta Lambretta Lince 150
  • Serveta Lambretta Scooterlinea 150
  • Serveta Lambretta Special 150
  • Serveta Lambretta Scooterlinea 175
  • Serveta Lambretta Jet 200
  • Serveta Lambretta Lince 200
  • Serveta Lambretta Scooterlinea 200
  • SIL Lambretta GP 125
  • SIL Lambretta GP 150
  • SIL Lambretta GP 200
  • Vespa 50 (V5A1T, 1963)
  • Vespa 50 L (V5A1T)
  • Vespa 50 N (V5A1T)
  • Vespa PK 50 (V5X1T)
  • Vespa PK 50 N (V5X5T)
  • Vespa PK 50 S (V5X2T)
  • Vespa PK 50 Automatik (VA51T)
  • Vespa PK 50 S Lusso (V5X2T)
  • Vespa PK 50 SS (V5S1T)
  • Vespa PK 50 XL (V5X3T)
  • Vespa PK 50 XL Rush (V5X4T)
  • Vespa PK 50 XL2 (V5N1T)
  • Vespa PK 50 XL2 (V5X3T)
  • Vespa PK 50 XL2 Automatik (V5P2T)
  • Vespa PK 50 XL2 HP (V5N2T)
  • Vespa PK 50 XLS (V5S2T)
  • Vespa 50 S (V5A1T, 1964)
  • Vespa 50 Special (V5A2T)
  • Vespa 50 Special (V5B1T)
  • Vespa 50 Special (V5B3T)
  • Vespa 50 Special Elestart (V5A3T)
  • Vespa 50 Special Elestart (V5B2T)
  • Vespa 50 Special Elestart (V5B4T)
  • Vespa 50 SR (V5SS2T, 1975-)
  • Vespa P 80 X (V8X1T, -1983)
  • Vespa PK 80 S (V8X5T)
  • Vespa PK 80 S Automatik (VA81T)
  • Vespa PX 80 E Lusso (V8X1T, 1983-)
  • Vespa PX 80 E Lusso Elestart (V8X1T, 1984-1990)
  • Vespa 90 (V9A1T)
  • Vespa 125 (VM1T)
  • Vespa 125 (VM2T)
  • Vespa 125 (VNA1T)
  • Vespa 125 (VNA2T)
  • Vespa 125 (VNB1T)
  • Vespa 125 (VNB3T)
  • Vespa 125 (VNB4T)
  • Vespa 125 (VNB5T)
  • Vespa 125 (VNB6T)
  • Vespa 125 ET3 (VMB1T)
  • Vespa 125 GT (VNL2T)
  • Vespa 125 GTR (VLB2T)
  • Vespa 125 Nuova (VMA1T)
  • Vespa P 125 X (VNX1T, -1983)
  • Vespa PK 125 (VMX1T)
  • Vespa P 125 ETS (VMS1T)
  • Vespa PK 125 S (VMX5T)
  • Vespa 125 Primavera (VMA2T)
  • Vespa PX 125 E Lusso (VNX2T, 1984-1997)
  • Vespa PX 125 E Lusso (ZAPM09300, 1998-2000)
  • Vespa PX 125 E Lusso (ZAPM09302, 2001-)
  • Vespa 125 Super (VNC1T)
  • Vespa PX 125 T5 (VNX5T)
  • Vespa 125 TS (VNL3T)
  • Vespa 150 (VBA1T)
  • Vespa 150 (VBB1T)
  • Vespa 150 (VBB2T)
  • Vespa 150 (VL1T)
  • Vespa 150 (VL2T)
  • Vespa 150 GL (VLA1T)
  • Vespa P 150 X (VLX1T, -1980)
  • Vespa PX 150 E (VLX1T, 1981-1983)
  • Vespa PX 150 E Lusso (VLX1T, 1984-1997)
  • Vespa PX 150 E Lusso (ZAPM09400, 1998-2000)
  • Vespa PX 150 E Lusso (ZAPM09401, 2001-)
  • Vespa 150 Sprint (VLB1T)
  • Vespa 150 Sprint Veloce (VLB1T)
  • Vespa 150 Super (VBC1T)
  • Vespa 160 GS (VSB1T, 1962, GS4)
  • Vespa 160 GS (VSB1T, 1963, GS4)
  • Vespa 180 Rally (VSD1T)
  • Vespa 180 Super Sport (VSC1T, SS180)
  • Vespa P 200 E (VSX1T, -1980)
  • Vespa PX 200 E (VSX1T, 1981-1983)
  • Vespa PX 200 E Lusso (VSX1T, 1984-1997)
  • Vespa PX 200 E Lusso (ZAPM18, 1998-)
  • Vespa 200 Rally (VSE1T, Ducati)
  • Vespa 200 Rally (VSE1T, Femsa)

Luggage carrier folding front -FA ITALIA- black matt

3331487 | Suitable for modern LX / LXV S models:

Fits the following modern Vespa models
  • Vespa LX50,
  • Vespa LX125,
  • Vespa LX150,
  • Vespa LXV50,
  • Vespa LXV125,
  • Vespa S50,
  • Vespa S125,
  • Vespa S150

 

Scooter Center Classic Day 2019

Scooter Center Classic Day ’19 – August 31, 2019

After our successful season start, we now invite you to our legendary Classic Day. We are looking forward to another great day with many friends!

The best entertainment and catering will be provided and the Scooter Center test bench will be ready for your scooter.

Scooter Center Anrollern zum Teilemarkt 18.Mai 2019

Parts market

Take the opportunity: bargains, remnants, returns, B-goods and sale of remnants in the Scooter Center Store. There’s also a large private parts market where you can also sell yourself. Now clear your workshop, cellar and garage and sell your best parts on the scooter parts market. The parts stand is of course free of charge for you again!

Registration for the parts market

Location: Scooter Center Store

Scooter Center Teilemarkt Fotos und Video

Der Scooter Center Store von innen

 

 

Vespa PK S mit Kantemschutz

We have it: Leg shield beading for Vespa PK, PK-S, PK-S Lusso, PK ETS

The Vespa PK S models and the big sister Vespa PK ETS have become cult models among the Vespa Smallframe models. These scooter models have developed into sought-after vehicles.

From Piaggio, the list of original spare parts still available for the first models of the PK series is getting shorter and shorter.
Beside the peculiarities like

  • Speedo,
  • tank and the
  • Handlebar cover,

is certainly the edge protector for the leg shield / Leg shield beading of one of the most sought-after spare parts. With the PK S, this Leg shield beading  is a design that it does not share with later models, which makes this part even rarer!

 

 

The rare spare part was not available for a long time.

Now, after almost a year and the examination of many samples, we can offer the edge protection of the PKS/ETS models again in very good quality and fit.
The available colours are: silver (as in the original) and new: also in black.

The Vespa PKS is independent when assembling the edge protectors, because the edge protectors are riveted to a tread strip end piece.
We can offer the necessary end pieces of the step strips in various sets.
The following variants are available:

  • silver, without fixing material 3332778
  • black, without material for fastening 3332779
  • silver, incl. step end pieces and rivets 3332778KTS1
  • black, incl. step end pieces and rivets 3332779KTB1
  • silver, incl. step strips, step strip end pieces and rivets 3332778KTS2
  • black, incl. step strips, step strip end pieces and rivets 3332779KTB2

Simple assembly:

You need a drill/drill, and a riveter tool

  1. The heads of the blind rivets of the front, outer step strips must be removed by drilling. The end pieces thus release the old edge protection. The remains of the blind rivets remain in the old end pieces, so the end pieces, which are usually already damaged, can unfortunately no longer be used.
  2. The new edge protector is guided downwards from above, simultaneously on both sides in the bead of the leg shield.
  3. The two curves at the top are hooked into the bead.
  4. The new edge protection is hooked in with the new tread strip end pieces at the bottom and the tread strip end pieces are fastened with blind rivets.
  5. Finished :-)

 

The environment is in our hands

Together we have the chance to do something against the global climate change and to leave a healthy environment to the future generations.

Climate-neutral parcel shipment in cooperation with DHL

GOGREEN is a new service offered by DHL for the CO2 neutral shipment of your parcels – one of the first one worldwide.
Within the GOGREEN initiative the CO2 emissions generated by a transport are measured according to a certified procedure (ISO 14064). In compliance with the aims and requirements of the Kyoto Protocol these emissions are compensated by the climate protection projects supported by DHL.

 

Our active contribution to environmental protection

We from Scooter Center GmbH, as a company, are committed to protecting the environment with a responsible behaviour. This is the reason why we make an active contribution to climate protection e.g. with the DHL climate neutral shipment. The additional costs charged by DHL are borne by Scooter Center.

 

DHL GoGreen

 

GOGREEN climate protection – how it works

Thanks to the GOGREEN services, DHL takes measures in order to reduce or eliminate from the atmosphere the CO2 emissions generated by a transport. Therefore, DHL pays particular attention to a series of initiatives in terms of geographical location as well as of type of promoted projects such as:

  •  Reforestation of the Amazon Rainforest with the Amazon Rainforest Foundation
  •  Changeover to low-emission or emission-free DHL fleet
  •  Usage of biofuel such as biodiesel or vegetable oil
  •  Usage of solar energy in the new DHL buildings
  •  Initiatives for environmental protection supported by DHL worldwide

Further information on GOGREEN project by DHL is available are: www.dhl.de/go-green

 

 

LED  Rücklicht Vespa GTS 2019

Black LED taillight for the new Vespa GTS models

We can now offer our popular MOTO NOSTRA LED taillights “LED BOULDER” & LED “SLIMSTYLE” for the brand new 2019 GTS models:

  • VESPA GTS125/300 (year 2019-)
  • Vespa GTS125 iGet
  • Vespa GTS300 HPE
  • Vespa GTS300 SUPERTECH
  • Vespa GTS300 SUPERSPORT

MOTO NOSTRA LED Taillights

Familiar high quality LED taillight from MOTO NOSTRA with tinted glass. Noble look by LED lightbar for the driving light. The trapezoidal lightbar shines in a pleasantly warm red. The brake light shines intensely bright through LED spots. The license plate illumination is also equipped with LED technology.

Buy MOTO NOSTRA LED taillights for Vespa GTS 2019 here

With E-mark / approval

The set is approved for public road traffic. The rear light has an E-test mark, which means that no presentation to the TÜV is necessary!

Scope of delivery

You will receive everything you need for the installation of the new taillight. You receive the taillight set completely ready for installation, no modifications are necessary!

  • MOTO NOSTRA Led taillight
  • MOTO NOSTRA rear light frame
  • Mounting material:
    • Adapter cable with high-quality Super Seal connectors
    • Self-adhesive neoprene sealing strip for sealing to frame
    • screws

Black rear light – the rear light frame is available in different colours.

Installation instructions Vespa GTS taillight

Easy installation in only 10 minutes! We have done a small tutorial here. Everybody can do the conversion. By the way, you can also restore the original condition without problems and residue.

Tutorial Vespa GTS Umbau LED Rücklicht Vespa GTS 2019 😍 LED Rücklicht Vespa GTS

MOTO NOSTRA LED TAILLIGHT „BOULDER“

MOTO NOSTRA LED RÜCKLICHT „BOULDER“  Available with rear light frame in:

MOTO NOSTRA LED TAILLIGHT „SLIMSTYLE“

MOTO NOSTRA LED RÜCKLICHT „SLIMSTYLE“ 

Available with rear light frame in:

Buy MOTO NOSTRA LED taillights for Vespa GTS 2019 here

TIP

By using the MOTO NOSTRA tail light on a new GTS model from 2019, the coveted mini luggage racks from e.g. MOTO NOSTRA (PV4603 or 3332009) will fit back on the scooter.

Rear carrier -MOTO NOSTRA, with pillion handle- Vespa GTS

Gepäckträger hinten -MOTO NOSTRA Vespa GTS   https://blog.scooter-center.com/vespa-gts-hpe-schwarze-zierteile-und-zubehoer/

LA2019

SC Specials Lambretta

We have always been at the forefront in Germany when it comes to the Lambretta. We started our business nearly 30 years ago with bringing Lambrettas and Vespa from Italy and England to Germany. And did a lot of development aid here with that. After loads of scooters had been imported, we started to organizing the spares and tuning parts as well- And that is how it all started back then.

Lambretta Specials Katalog Lambretta Katalog 2019

Preview and suggestions for Lambretta

Right in time for the Eurolambretta in Zakopane we have finished our new Lambretta sales leaflet. There you find some highlights of the Lambretta parts available and a hint of what is waiting online at www.scooter-center.com You can order our Lambretta Special here  and also browse directly online here:

SC Specials brochure Modern Vespa Smallframe Sprint / Primavera

We’ve just published our new brocure for Vespa Modern Smallframe Sprint / Primavera (click here to see the SC Specials brochure for Classic Vespa Smallframe)

Below you can already view online our brochure with a wide range of items and accessories for your Vespa.

Here a preview video:

Vespa Modern Smallframe Specials Primavera & Sprint Katalog

View online the Vespa Primavera / Vespa Sprint brochure


Scooter Center catalogues

Our latest Scooter Center catalogues are available in the following section: Scooter Center Catalogues

Lambretta Sitzbank Pegasus Made in Italia

Pegasus seat – Ulf’s favourite seat for Lambretta

Where does the Pegasus seat originally come from?
The UK market was the only market where the Lambretta sales hit the Vespa sales easily.

The main reason for that is the excellent strategy the Lambretta Concessionaires had for bringing the Lambretta to the market. To get a picture of the full story Stuart Owen’s book about the Concessionaires (SC item number 3332513) is the best reference point.

Pegasus seat, special editions, colour combinations

“Dealer Specials” The English brought to the market nice special editions and particular colour combinations and there was also the Pegasus seat. This wonderful seat was made for the following models:

  • Rallymaster
  • Serie 2
  • TV 175
  • GT (TV) 200

During the production there were different versions and features.

Get here your bgm Lambretta Pegasus seat

Lambretta Sitzbank Pegasus

Handmade in Bella Italia

The bgm Pegasus Lambretta seat is handmade with love in Italy. The seat has a base made of stamped metal and a high quality upholstery from foam. Optically and qualitatively this seat looks like it did originally in the 60s.

The base is painted in Innocenti colour code 8082 and the aluminium surrounding is full circle on it. The cherry on the cake is the Lambretta Pegasus rear badge.

Get here your bgm Lambretta Pegasus seat
Erweiterung für Vespa Rangierhilfe

Useful add-on for BGM scooter dolly for classic Vespa

Practical and stable add-on for the scooter dolly compatible with all classic Vespa and Lambretta models, made of robust galvanised steel. Thanks to the two pivoting double castor wheels of this innovative BGM product you can move your scooter on its own axis.

With this add-on you can easily and safely park your scooter on the centre stand and even in areas with limited space!

Moving your scooter in your garage, workshop or while on displaywill be very easy and requires no effort. Ideal for stores and workshops!

The following add-on fits the Vespa scooter dolly: part no. 3332536.

Erweiterungssatz Motorroller Rangierhilfe bgm PRO Vespa

Solid galvanised steel structure

Add-on for scooter dolly (rear wheel) -BGM PRO- Smallframe/Largeframe/Wideframe, Lambretta series 1-3 – V50, V90, PV, ET3, PK, PX, T5 125cc, Rally, Sprint, GT, GTR, SS180, GL, Super, GS160, VNA, VNB, VBA, VBB, V1-V15, V30-V33, VN, VM, VU, VL,

Manufacturer: bgm Pro
Part no.: 3332536XL

Get here your add-on for classic Vespa scooter dolly!

Scooter dolly

LED Lauflicht Blinker Vespa GTS

Indicators with dynamic LED sequential light and with E-mark for Vespa

The trend comes from the automotive industry and the LED technology allowed us to develop these indicators. With its own brand “Moto Nostra” Scooter Center is the first manufacturer that produces and sells indicators with dynamic LED sequential light for Vespa scooters. What’s new:

Vespa GTS Lauflicht LED Blinker | Running light LED indicators

Exclusive new item by Moto Nostra

The LED light of these indicators is sequential, this means that the single LEDs don’t turn on simultaneously but in sequence creating the so-called sweeeping effect.

Design and safety

– with E-mark –

The design of the Moto Nostra indicators is just superb. However, our aim was also to develop an item which guarantees the rider’s safety. The LED indicators are very bright and thanks to the sequential LEDs your scooter will be much more visible in road traffic, a very important aspect for us scooterists. In addition, the front indicators feature the daytime running light, also for models before 2014.
The Moto Nostra indicators are available in the following versions:
  • colourless lenses
  • smoked lenses
The colour of the indicators with smoked lenses is exactly the same of the Moto Nostra tail lights. A perfect combination if used together
The indicators feature the homologation E-mark and are therefore homologated for use on public roads. No further technical inspection necessary.

Available for all Vespa GTS models

The new indicators are available as set of two (front or rear) and as a convenient set of four (front and rear).
For the models before 2014 the indicators include a wiring loom for a plug and play connection. Even though your Vespa GTS is a pre-facelift model, it will also feature daytime running lights, a further security feature.
The indicators of the models from 2014 and 2018/2019 are somewhat cheaper since they don’t include any further wire and you can use the genuine connector.
Lambretta  Kurbelwelle -BGM Pro HP Competition 58mm Hub, 110mm Pleuel- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc bgm Pro Artikel-Nr.: BGM11058N

bgm PRO Competition – new bgm crankshafts for Lambretta

From strength to strength!

bgm Pro

We have revised our crankshfts for Lambretta. We worked with the manufacturer for alsmost three years and we are very satisfied with the results. The testing lasted as long as the development work.

The new crankshafts for Lambretta are available with 58 mm and 60 mm stroke and 107 mm, 110 mm and 115 mm conrod:

Tested on the circuit

Darren Conneely of the Team Replay successfully tested the bgm PRO Competition crankshafts during the BSSO competition of the season 2018. Paul “Chalkie ” White of the Team Replay mounted on the Lambretta Group 4 the cylinder bgm RT 195 and the new crankshaft bgm PRO Competition. With a power of over 30 HP on the rear wheel and up to 11,000 rev/min that was a real endurance test.

And while we intensively tested these crankshafts on road, Darren, with our crankshaft, took the second place in the Group 4. Congratulations!

SLUK | Replay Racing BGM RT Group 4 Lambretta

Stroke 60mm, conrod 110mm

Crankshaft -BGM Pro HP Competition stroke 60mm, conrod 110mm- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

BGM11060N

Stroke 60mm, conrod 107mm

Lambretta Kurbelwelle -BGM Pro HP Competition 60mm Hub, 107mm Pleuel- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc bgm Pro Artikel-Nr.: BGM10760N

Crankshaft -BGM Pro HP Competition stroke 60mm, conrod 107mm- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

BGM10760N

Stroke 58mm, conrod 110mm

 Lambretta Kurbelwelle -BGM Pro HP Competition 58mm Hub, 110mm Pleuel- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc bgm Pro Artikel-Nr.: BGM11058N

Crankshaft -BGM Pro HP Competition stroke 58mm, conrod 110mm- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

BGM11058N

 

The good features remained the same whereas the some other significant technical details were improved.

Improved features are:

  • Precision-ground crank pin holes on the crank webs for perfect anti twisting qualities
  • Precision-ground and coated crank pin
  • Forged connecting rod with CNC finishing
  • Hardened and precision-ground bearing surfaces and oil seal seats
  • Broad selection of stroke and connecting rod combinations
  • Quality assurance of each individual crankshaft through 100% ISO and QC certified manufacturer testing

 

Remaining features:

  • Full circle crankshaft for increased primary compression
  • Forged crank webs
  • Reduced engine vibration thanks to fully balancing with hidden pockets, copper and tungsten balance weights
  • Lubrication of the lower conrod bearing via two large lubrication slots
  • Hub pin diameter 22 mm

 

15 years experience in crankshaft development

There is 15 years of experience with building our Lambretta cranks. The development of this new and massively improved type has taken another three years of development work and tests to realize a shaft that offers maximum anti-twisting stability.

Team Replay used a selection of bgm parts during the BSSO race Series in 2018. Replay’s rider Darren Conneely finished the season in Group 4 on a 2nd overall using the new crank.

Vespa GTS Rangierhilfe

bgm PRO scooter dolly for Vespa GTS

After launching our scooter dolly for classic Vespa and Lambretta scooters, we have now something new in stock: the bgm PRO scooter dolly for all Vespa GT, GTS, GTL and GTV models. This dolly is very useful to move your scooter in your workshop or garage easily and without effort.

Easy to use

Place your Vespa on the side stand. Then position the two-piece dolly directly under your scooter and fix it with the wing screw. Now take your scooter on the centre stand and block it on the dolly.

Once the Vespa is blocked on the dolly, you can quickly move your scooter in any direction and without any effort. Watch the video to see how it works.

Vespa GTS Rangierhilfe bgm PRO

Perfect also for your store

The Vespa GTS scooter dolly by bgm PRO is made of robust galvanised steel, totally rigid even under full load. The four extremely easy scrolling polyamide castor wheels allow you to move your scooter with the minimal effort and to park it in totally safe position. The dolly has a load capacity of max. 200 kg since each roller can carry up to 50 kg.

Thanks to its sturdy design this scooter dolly can also be used to park your scooter for a long time (for instance in winter) or also in your store.

With our Vespa scooter dolly you can easily move and park your scooter also in a small garage or areas with limited space.

Get here your Vespa scooter dolly!

Does the scooter dolly also fit my Vespa?

In our online shop you can also find the scooter dolly for classic Vespa. The bgm PRO scooter dolly presented here fits all modern Vespa scooters like GT / GTL / GTS / GTV with centre stand, such as the following models:

  • Vespa GT 125
  • Vespa GT 125 L
  • Vespa GT 125 L (Euro 3)
  • Vespa GT 200
  • Vespa GT 200 L
  • Vespa GT 60 250ie
  • Vespa GTS 125 (Euro 3)
  • Vespa GTS 125ie Super
  • Vespa GTS 125ie Super (2011, ZAPM45300)
  • Vespa GTS 125ie Super (2012, ZAPM45300)
  • Vespa GTS 125ie Super (2014, ZAPM45300)
  • Vespa GTS 125ie Super (2014, ZAPM45301)
  • Vespa GTS 250
  • Vespa GTS 250 (2011, ZAPM45100)
  • Vespa GTS 250 ABS
  • Vespa GTS 250ie
  • Vespa GTS 300 (2014, ZAPM45200)
  • Vespa GTS 300 (2014, ZAPM45202)
  • Vespa GTS 300ie Super
  • Vespa GTS 300ie Super (2014, ZAPM45200)
  • Vespa GTS 300ie Super (2014, ZAPM45202)
  • Vespa GTS 300ie Super Sport
  • Vespa GTS 300ie Super Sport (2011, ZAPM45200)
  • Vespa GTS 300ie Super Sport (2012, ZAPM45200)
  • Vespa GTS 300ie Super Touring
  • Vespa GTS 300ie Super Touring (2011, ZAPM45200)
  • Vespa GTS 300ie Super Touring (2013, ZAPM45200)
  • Vespa GTV 125
  • Vespa GTV 250
  • Vespa GTV 300
  • Vespa GTV 300ie (ZAPM45201) Via Montenapoleone
  • Vespa GTV 300ie (2012, ZAPM45201) Vie della Moda
  • Vespa GTS 250 (2011, ZAPM45100)
  • Vespa GTS 300 (2016, ZAPMA3300)
  • Vespa GTS 300 ABS (2014, ZAPM45200)
  • Vespa GTS 300 ABS (2014, ZAPM45202)
  • Vespa GTS 300 ABS (2016, ZAPMA3300)
  • Vespa GTS 300ie (2014, ZAPM45200)
  • Vespa GTS 300ie (2014, ZAPM45202)
  • Vespa GTV 125 (Euro 3, ZAPM31301) Navy
  • Vespa GTS 250 (2005, ZAPM45100)
  • Vespa GTS 250 (2006, ZAPM45100)
  • Vespa GTS 250 (2008, ZAPM45100)
  • Vespa GTS 250 (2009, ZAPM45100)
  • Vespa GTS 250 (2010, ZAPM45100)
  • Vespa GTS 250 (2012, ZAPM45100)
  • Vespa GTS 250 (2013, ZAPM45100)
  • Vespa GTS 250 (2014, ZAPM45100)
  • Vespa GTS 125 (2007, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2008, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2009, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2010, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2011, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2012, Euro 3, ZAPM31300)
  • Vespa GTS 125 (2016, Euro 4, ZAPMA3100)
  • Vespa GTS 250 (2004, ZAPM45100)
  • Vespa GTS 250 (2005, ZAPM45100)
  • Vespa GTS 250 (2007, ZAPM45100)
  • Vespa GTS 250 ABS (2007, ZAPM45101)
  • Vespa GTS 250 ABS (2009, ZAPM45101)
  • Vespa GTV 250 (2006, Euro 3, ZAPM45102)
  • Vespa GTV 250 (2007, Euro 3, ZAPM45102)
  • Vespa GTV 250 (2008, Euro 3, ZAPM45102)
  • Vespa GTV 250 (2009, Euro 3, ZAPM45102)
Silentblock Vespa Silentgummi

Optimised asymmetrical silent blocks by bgm PRO

The engine of your Vespa requires two different engine mountings, the one for the right side (heavy engine side) and the other for the left side (light exhaust side).

We developed the optimised silent blocks for Vespa Smallframe and Largeframe, as well as for the Lambretta. These silent blocks are now also available for Vespa PK.

bgm PRO silent blocks

  • more ride comfort
  • high tracking
  • high steering precision
  • high stiffness

The bgm PRO silent blocks give much better handling thanks to a more precise guidance of the engine in the engine casing. The reinforced rubbers have an asymmetrical degree of hardness. Therefore, even with stiff suspensions, you can still have a good ride comfort.

Thanks to the reinforced engine mountings, available in set, you have a better tracking, steering precision and stiffness. The fitting is easy and their replacement is recommended e.g. during the engine overhaul.

Further information on the bgm PRO silent blocks for Vespa

Replace the silent blocks of your Vespa!


Easy fitting

Vespa PX 200, V50, PV125 ET3, PK

These models feature inserted rubbers. Remove the old rubbers from the engine casing.
Put the new bgm PRO silent blocks in the engine casing using a little bit of talcum.

Vespa PX80-150, Sprint, VBB, etc.

These models feature standard pressed silent blocks.
To get these out of the casing you have to grind, cut or drill off the ends. Then you take off the tube and rubbers from the casings. Put the new bgm PRO rubbers into the casings using a little bit of talcum.

Notice

Please do not grease or oil the new rubbers. Mount them dry and use talcum to ease up the fitting.

Please note

The silent blocks are mounted according to the side of the riding direction:

  • In ride direction, left hand side: red marked
  • In ride direction, right hand side: green marked

Silentblock set engine -BGM PRO- Vespa Small- and Largeframe

Tolle Vespa für Kinder

The perfect scooter for kids!

A Vespa for kids? Sure! Before Christmas we got the first Vespa scooter for kids, an amazing gift idea to drop under the Christmas tree. And now, just before Easter, this sought out scooter for kids is back in stock!

Are you looking for a present for your child, nephew or friends? This fantastic Vespa for kids is what we recommend you!

The electric Vespa is available as PX and GTS model and in different colours for each model.

Get here the Vespa scooter for kids!
Kids Electro Vespa Scooter | Vespa für Kinder
Get here the Vespa scooter for kids!
Vespa Fiber Jethelm SALE

Sale: Vespa open face helmet

An open face helmet perfectly suits the style and design of a Vespa. What fits better than a genuine Vespa open face helmet?

These top quality fiberglass models “Vespa Fiber Decal Jet” and “Fiber Lux Jet” of the Premium series are available in our online shop at a special price:

Part number Description Standard retail price
606128M04W Helmet -VESPA Fiber Decal Jet – white – L (59-60 cm) 235,00 RRP
99,95
606128M04F Helmet -VESPA Fiber Lux Jet – white – L (59-60 cm) 265,00 RRP
129,00
606128M04B Helmet -VESPA Fiber Decal Jet – black – L (59-60 cm) 235,00 RRP
129,00
606128M03W Helmet -VESPA Fiber Decal Jet – white – M (57-58 cm) 235,00 RRP
99,95
606128M03F Helmet -VESPA Fiber Lux Jet – white – M (57-58 cm) 265,00 RRP
99,95
606128M03B Helmet -VESPA Fiber Decal Jet – black – M (57-58 cm) 235,00 RRP
99,95

Information on size

Please note: the Vespa fiberglass helmets fit small!

Get your new Vespa helmet here in our Scooter Center shop

Piaggio helmet with sun visor

High quality and genuine Vespa Piaggio open face helmet provided with a high resistant fiberglass shell. Beautiful classic design, modern technology and comfort.

The helmet also comes with an internal retractable sun visor. The chinstrap has a micrometric retention system which allows you to open and close the chinstrap in less than no time. Breathable, removable and washable lining. The Piaggio Fiber helmets offer therefore a good quality/price ratio.

 

57 %

Up to  57% off!
Now at special price, while stocks last!

 

Manufacturer: Vespa

  • Helmet model: Fiber Lux / Fider Decal
  • Colour: white
  • Homologation: ECE 22.05
  • Helmet type: open face

Vespa Jet Helm Sale

Get your new Vespa helmet here in our Scooter Center shop
Topcase Halter Vespa Sprint Chrom

High quality top case rack for the new Vespa models Sprint and Primavera

Here we are with our new item by Moto Nostra, our own brand: practical top case rack to mount the genuine Piaggio top case in less than no time. Besides, the rack is also provided with a comfortable grab handle for the pillion which can alternatively also be used to fasten your luggage.

Accessories for your Vespa

Further items and accessories for your scooter are also available in our online shop!

Vespa Sprint Vespa Primavera Accessoire

Get here your top case rack

Our top quality racks for top case are available in matt black and chrome:

Top case rack Vespa matt black MN2030MB

Top case rear rack (for genuine Piaggio top case) -MOTO NOSTRA, with grab handle- Vespa Primavera 50 (ZAPC53100, ZAPC53200), Vespa Primavera 125 (ZAPM81100), Vespa Primavera 150 (ZAPM81200), Vespa Sprint 50 (ZAPC53101, ZAPC53201), Vespa Sprint 125 (RP8M82111, ZAPM81300, ZAPM81301) – matt black

Top case rack Vespa chrome MN2030C

Topcase Träger in Chrom

Top case rear rack (for genuine Piaggio top case) -MOTO NOSTRA, with grab handle- Vespa Primavera 50 (ZAPC53100, ZAPC53200), Vespa Primavera 125 (ZAPM81100), Vespa Primavera 150 (ZAPM81200), Vespa Sprint 50 (ZAPC53101, ZAPC53201), Vespa Sprint 125 (RP8M82111, ZAPM81300, ZAPM81301) – chrome

Vespa top case, accessories like back rest/ cushion and spare parts are also available in our online shop.

Does the top case rack fit my scooter?

The practical rack for top case fits the following scooter models:

  • Vespa Primavera 125 (-2013, ZAPM81100)
  • Vespa Primavera 125 (2013, ZAPM81100)
  • Vespa Primavera 150 (2013, ZAPM81200)
  • Vespa Primavera 50 (2013, ZAPC53200)
  • Vespa Primavera 50 (2013, ZAPC53100)
  • Vespa Sprint 125 (2014, RP8M82111)
  • Vespa Sprint 125 (2014, ZAPM81300)
  • Vespa Sprint 125 (2014, ZAPM81301)
  • Vespa Sprint 50 (2014, ZAPC53201) 2-stroke
  • Vespa Sprint 50 (2014, ZAPC53101) 4-stroke
  • Vespa Primavera 125 ABS (2013-2015, RP8M82100)
  • Vespa Primavera 125 ABS (2013-2015, RP8M82310)
  • Vespa Primavera 125 ABS (2013-2015, RP8M82821)
  • Vespa Primavera 125 ABS iGet (2016, RP8M82500)
  • Vespa Sprint 125 (2015, ZAPM81300)
  • Vespa Sprint 125 (2015, ZAPM81301)
  • Vespa Sprint 50 (ZAPC53201) 2-Takt
  • Vespa Sprint 50 Sport (2015, ZAPC53201) 2-stroke
  • Vespa Primavera 125 (2014, ZAPM81100)
  • Vespa Primavera 125 (2014, ZAPM81101)
  • Vespa Primavera 125 (2015, ZAPM81100)
  • Vespa Primavera 125 (2015, ZAPM81101)
  • Vespa Primavera 125 (2016, ZAPMA1100)

 

Get here your top case rack
Scheibe Windschutz Vespa PX

Sports flyscreen for Vespa PX

The beloved Moto Nostra cruiser flyscreen for Vespa GT/GTS/GTV is already for a long time in our product range. Now the set with flyscreen and supports is also available for the Vespa PX models.

This flyscreen, 4mm thick and made of PMMA (Altuglas®), is highly scratch and shock-resistant. The material used is extremely resistant, ageing-resistant and easy to clean.

  • Width: 34cm
  • Height: 10,5cm

Vespa flyscreen with TÜV certification

The flyscreen is available in colourless, smoked and black, while the supports are in black or chrome:

Chromed supportsBlack supports
MN2514B
Flyscreen with chromed supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – black flyscreen

MN2514MB

Flyscreen with chromed supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – smoked flyscreen

MN2514W

Flyscreen with chromed supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – colourless flyscreen

MN2514BB

Flyscreen with black supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – black flyscreen

MN2514BMB

Flyscreen with black supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – smoked flyscreen

MN2514BW

Flyscreen with black supports -MOTO NOSTRA, W=340mm, H=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella – colourless flyscreen

Get here your Vespa PX flyscreen

Moto Nostra Flyscreen

Despite the compact dimensions, which give a sportive style, this flyscreen is remarkably effective since it relieves the wind pressure off the rider even at high speeds. This enables you to often reach a higher top speed. Thanks to the small surface the crosswind sensitivity is much better than that of the higher windscreens.

The Moto Nostra flyscreen comes with TÜV conformity certification and German national type approval (ABE).

TIP

The flyscreen is also available in our Scooter Center catalogues.

CONCLUSION

The Moto Nostra flyscreen is the ideal touring flyscreen with sportive look and official certification.

FITTING

Mounting the flyscreen is very simple.

 

Get here your Vespa PX flyscreen