Malossi 210 cc tuning kits for Vespa p-range, P200, V2008, Sport, MHR – first sight

,

Malossi has updated the famous 210 cc tuning kits. The V2008 version is superseded by two different versions of the kit. Now you do have the choice between the Sport or the MHR versions.

We already reoprted about this and now to take a closer look of what has been changed, improved and altered.

There are three part boost ports now. increased port timing areas for the transfer ports and an opened bottom of the barrel at the transfer area.

1120002MHR(7)

Compared to the 2008 version of the Malossi 210 kit the wider auxiliary transfer ports the area and direction was changed as well.

Malossi MHR 210 Vespa 016

While the V2008 was working at a steep angle to the cylinder wall of around 60°, both new kits seem to have the angle modified for the greater pulse of the larger auxiliary ports. It flows at around 42° into the bore.

Malossi MHR 210 Vespa 017

On it goes now. Now with the calliper and we check the port timings. If you thought the MHR has higher port timing readings only, is not right.

MALOSSI 210 Old Sport MHR
Barrel height (surface area to surface area) 96,73 96,73 96,56
Exhaust port 33,85 32,85 32,70
Transfers 47,20 47,35 45,85
Exhaust outer Ø 44,20 44,45 44,45
Exhaust inner Ø 37,80 38,00 38,30
57mm
w/o recess of piston (MHR 0.2mm piston running out of bore)
Transfer timing 110,7° 109,9° 117,1°
Exhaust timing 173,3° 177,3° 177,1°
Blowdown timing 31,3° 33,7° 30°
60mm 1.5mm base gasket
w/o recess (MHR 0.2mm piston running out of bore)
Transfer timing 124,4° 123,6° 129,9°
Exhaust timing 180,9° 184,7° 184,5°
Blowdown timing 28,25° 30,55° 27,3°
60mm 1.5mm head gasket
measurements include MHR 0.2mm piston running out of bore
Transfer timing 116,7° 115,9° 125,1°
Exhaust timing 175,2° 179° 183,2°
Blowdown timing 29,25° 31,55° 29,05°
1.0mm piston running out of bore
Transfer timing 119,3 118,6 126,1
Exhaust timing 177,1 180,9 181,5

Next week we are deepening this issue. Now I am needed to do some laps at the race scoot.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply