bgm PRO air intake hose for Lambretta- over 1HP more power for less than 20 Euro

bgm PRO air intake hose for Lambretta: more power, increased start-up performance, faithful to the original design

In comparison with the standard intake hose, the bgm PRO air intake hose has a higher volume on the side of the carburettor. The air intake hose is available in two different connection sizes for the carburettor:

Buy here air intake hose for Lambretta

 

Air intake hose / Ansaugschlauch bgm PRO Lambretta Keihin & DellOrto

 

Air filter box or foam air filter

The connection size on the side of the air filter is equal to 42 mm so that you can use the intake hose either with the genuine air filter box or with a foam air filter.

1,3 HP more power

 

The chart of our test shows the difference between the standard Lambretta dl/GP air intake hose and the bgm intake hose. The comparison was made using the following parts:

Buy here air intake hose for Lambretta

Increased start-up performance

Another significant advantage of the bgm PRO air intake hose is the drain system at the bottom of the intake hose: the fluid expelled from the carburettor does not accumulate in the hose and this prevents the idle speed system from clogging.

 

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply