Posts

Individual gift ideas for scooterists by the Scooter Center team

Name: Daniel

daniel-grip-lock-schloss

How long have you been working for Scooter Center:

For approx. 16 years

What is your task at Scooter Center:

Purchase Europe, general administration

What’s your relation to scooters:

I ride scooters since 2004. My first scooter was a Gilera Runner FXR with an enormous acceleration and speed that filled me with enthusiasm. This was also true for others, so sadly it was gone one day… :-(

Therefore the “GRIP-LOCK” lock for brake lever is my gift idea.

Gift idea for scooterists

Lock – security lock – lock for brake lever -GRIP LOCK- for brake lever, clutch lever – yellow, black or red

Part no. 7674997

grip lock

Why:

It is small and quickly put in place and taken off. At the same time it’s robust and almost impossible to break.
Compared to brake disc locks, it is impossible for you to forget to take off the lock before going for a ride.

Had I had this lock, I would probably still ride my FXR!

Grip-Lock the express-lock - also available for scooters
ASSEMBLY
Putting the Grip-Lock in place and taking it off takes less than 10 seconds.

PROTECTION
The Grip-Lock comes in a bright colour and is easy to make out on the handlebar. That scares potential thieves off immediately! But naturally, that alone is not enough: The Grip-Lock’s interior consists of four strong steel bolts made from tempered spring steel, that effectively prevent theft with the help of a saw or other cutting tools. Thanks to its reinforced nylon-fiber outer cover it is absolutely stainless.

SECURE
With the throttle secured, it is impossible for you to forget to take off the lock before going for a ride. In regard to brake disc locks or other external locks, a forgotten lock can cause severe damage to the vehicle.
BASF-special nylon featuring fiberglass reinforcement that is used for Grip-Lock is 200% stronger than ordinary multi-purpose plastics and makes the security device especially strong and rigid.

CLEAN
Grip-Lock is cleaner and easier to use than complicated and messy brake disc locks or chain locks that first need to be squeezed between the frame or spokes.

geschenk-grip-lock-schloss

The Grip Lock express lock – easy to use – hard to pick

The Grip-Lock security system for scooters, motorcycles and mopeds is a new device that protects the valuable motorbike from theft. Grip-Lock can be easily attached to the throttle and the brake lever and safely secures them.

Hence, Grip-Lock is suitable for Vespa, Lambretta, almost all motorcycles, scooters, pedal mopeds, mopeds, quads, trikes and many more.

Easy and fast assembly

Putting the Grip-Lock in place and taking it off takes less than 10 seconds.

Order Grip-Lock here

Grip-Lock – secure protection against theft for scooters

The Grip-Lock comes in a bright colour and is easy to make out on the handlebar. That scares potential thieves off immediately! But naturally, that alone is not enough: The Grip-Lock’s interior consists of four strong steel bolts made from tempered spring steel, that effectively prevent theft with the help of a saw or other cutting tools. Thanks to its reinforced nylon-fiber outer cover it is absolutely stainless.

With the throttle secured, it is impossible for you to forget to take off the lock before going for a ride. In regard to brake disc locks or other external locks, a forgotten lock can cause severe damage to the vehicle.

BASF-special nylon featuring fiberglass reinforcement that is used for Grip-Lock is 200% stronger than ordinary multi-purpose plastics and makes the security device especially strong and rigid.

Grip Lock sicheres Schloss für Motorroller

Grip-Lock is clean

Grip-Lock is cleaner and easier to use than complicated and messy brake disc locks or chain locks that first need to be squeezed between the frame or spokes.

The lock can be stored easily

Weighing only 330 grams and measuring 15 x 4.5 x 5 cm, the Grip-Lock will go inside your glove compartment, the helmet case or under the seat.

High Quality – Made in New Zealand

All Grip-Lock products are designed and manufactured in Auckland, New-Zealand under German management. The locks have been optimized for maximum robustness and endure attacks with screw drivers, hand saws, lock-picking devices, etc. permanently and reliably.

In addition to that, all of the Grip-Lock components have undergone numerous tests on enhanced aging (i.e. UV test, salt steam test, etc.) in order to ensure the materials’ longevity in outdoor use and that they do not become brittle or go yellow.

Three year warranty

You receive a 3 year manufacturer’s warranty on any Grip-Lock.

Robust materials for a maximum of security.

Vespa Schloss Grip Lock 3 jahre Garantie

Long-Life –High security lock

The locking mechanism has been developed according to three principles:

  • cannot be picked with ordinary lock-picking devices
  • very robust against drilling attacks
  • maximum longevity and uncompromising security under all conditions

Is delivered with three adaptors for a secure grip

Every Grip-Lock comes with three adaptors in order to guarantee that it fits all scooters and motorcycles at its best. It fits handgrips with a diameter of 27 to 38 mm or a circumference of 85 to 119 mm. This range covers about 95% of the market. Therefore, it fits almost all motorcycles, scooters, pedal mopeds, mopeds, quads, trikes and many more. In opened position no tools are necessary to adjust the Grip-Lock’s brake lever locking mechanism.

Order Grip-Lock here