Posts

bgm PRO Variomatik für Piaggio Quasar Motoren, z.B. Vespa GTS

The bgm PRO V2 variator for Vespa GTS in test

Our bgm PRO Vario for the Vespa GTS models is very popular. In this nice video, Marc from Scooteria tests the bgm PRO V2 variator on his Vespa GTS.

“A cheap and effective tuning measure for all Vespa Gts 300 riders. I compare it with the performance of the standard variator on the Vespa Gts 300 in the city, on the country road and motorway.”Marc, Scooteria

Conclusion of the test

  • Sportier: faster and higher in the rev range
  • Much higher revs
  • Much improved acceleration
  • Much more aggressive driving performance
  • Without annoying noise
  • +5 km/h top speed 125 km/h according to GPS with 13″ rims without discs
buy bgm PRO vario kit here

Video Variomatik Test

https://www.youtube.com/watch?v=wuVfCunEuWA BGM2311V2 Variomatik

BGM2311V2 Variomatik

How do I install the bgm PRO variator on a Vespa GTS?

Installation of the bgm PRO V2 vari ator in the Vespa Gts 300 hpe Supertech. Marc from Scooteria is at Cafe Racer 69 and Micha from the Cafe Racer 69 team explains in 25 minutes in a very sympathetic and detailed way what has to be considered when installing a Vario. There are also tips, such as the fact that with the bgm Vario on your new GTS you can ride the old GTS Vario cover, which many people find more attractive.

buy bgm PRO Vario-Kit here

Variomatic test

You are not sure yet? In this video Marc tests the variator in detail and shows the effect of the bgm PRO Sportvario during a riding test.

Video installation instruction Varioamtik Vespa GTS bgm PRO

BGM Pro Variomatik Vespa Gts 300 - Einbau

bgm PRO Variomatik für Piaggio Quasar Motoren, z.B. Vespa GTS

bgm PRO Variomatic for Piaggio Quasar engines, e.g. Vespa GTS

  • with extra long translation bandwidth
  • perfect draught and
  • high rear wheel power.

The bgm PRO variomatic uses a shorter and Kevlar reinforced V-belt than usual for Quasar engines. This allows our Vario to run a much wider range of ratios without the V-belt being able to touch the housing, as is the case with a Malossi Vario. As a result, the bgm Vario can drive a much wider range of ratios without the engine having to turn higher. A huge advantage, especially when the engine needs further tuning.

BGM2311V2 Variomatik

Engine power directly at the rear wheel

The countless bench and road tests have shown that the 250/300cc Quasar engines do not require a harder or different back pressure spring than the standard one. This means that the entire engine power is not lost in frictional heat but ends up where it belongs: at the rear wheel.

Vespa GTS Variomatic Test

With the Piaggio series variomatic, the engine runs into the governor much earlier. The power is therefore maintained much longer when looking at the speed axis, which is noticeable in a higher final speed.

Compared to the Polini set, the bgm Vario does not work at an artificially increased speed level to get an aha effect. The Polini Vario unfortunately buys its (too) high speed level with a worse efficiency.

Maintaining the same acceleration speed as the standard engine results in our bgm Vario-Kit, so that the engine is not loaded higher and the power output is pleasantly linear. In everyday use the superiority of the bgm Vario-Kit is clearly demonstrated in a direct 1:1 comparison.

bgm Buy PRO Vario-Kit here

Scope of delivery BGM2311V2

  • Variator
  • front pulley
  • V-belt: aramid reinforced (Bando)
  • Weights:
  • 21x17mm 12,5g (250cc)
  • 21x17mm 13,5g (300cc)
  • Spacers for belt pulley: between bushing and front belt pulley 1x 1,3mm, 1x 1,0mm
  • (both discs must be mounted)
  • Distance washer for belt pulley: between fixing nut and front belt pulley 1x 1,0mm
bgm Buy PRO Vario-Kit here

Fits the following vehicle models with quasar motor: