Adjuster screw and trunnion set -BGM PRO- for Vespa and Lambretta

, ,

New trunnions and adjustger screws (clutch cable, brake cable, throttle) for Vespa and Lambretta in a practical set

We have optimised the trunnions and adjuster screws for Vespa and Lambretta, they’re much easier to use and more reliable!

New: now also available in a practical set.
The adjuster screw and trunnion sets, together with the transmission cables, should be in everyone’s glove compartment. These sets fit many models of Vespa and Lambretta scooters and are a useful aid in case of breakdown.

 

Trunnion/adjuster screw set -BGM PRO- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

This set is for Lambretta models and includes the following parts:

More durable inner cables

The trunnions for the gear change and clutch cables are machined from brass and are provided with small plates.

The brass has a lubricating effect in the gear box and clutch mountings. Thanks to the reduced friction of the trunnion in the mounting, the cables are less subject to stress and the risk of tearing will be strongly minimized.

In the trunnions there are small plates which protect the cables from the notch effect and, as a result, this prevents the splitting of the single filaments when tightening the screw. The inner cable distorts less and thus it can be often untied and be easily tied again. For this procedure we suggest you to use pliers for transmission cables.

The set also includes the suitable Allen key SW 3,5.

Klemmnippel lambretta, bgm6465

Trunnion Lambretta BGM6498, 10×13 brass, 10×16 brass

 

Adjuster screw and trunnion set -BGM PRO- Vespa wideframe, largeframe and smallframe

The set for the Vespa models includes the following parts:

Optimised adjuster screws

The adjuster screws of the BGM set are provided with high nuts. Thanks to this new feature, adjuster screws can be easily used also with a normal open-end spanner even in those spots which are difficult to reach. In Vespa smallframe models with two gear change cables it will also be much easier to reach the lock nut.

Optimised trunnions

The trunnions for gear change and clutch cables are now are provided with small plates machined from brass.

The small plates prevent the notch effect and also the splitting of the single filaments when tightening the screw. The inner cable distorts less and thus it can be often untied and be easily tied again. For this procedure we suggest you to use pliers for transmission cables.

The trunnion for all Vespa scooters PK-XL2, HP and Cosa FL with the so called one cable gear change are slightly different from the trunnion for the two cable gear change: diameter (Ø7mm), height (12,5mm) and wrench size (2x SW8).

The trunnion for all Vespa scooters PK-XL2, HP and Cosa FL with the so called one cable gear change are slightly different from the trunnion used for the two cable gear change: diameter (Ø7mm), height (12,5mm) and wrench size (2x SW8). Due to its higher height this trunnion is also perfect for the clutch arm.

 

Klemmnippel Vespa BGM

Trunnion kit vespa BGM

Cable barrels

The cable barrels fit all BGM and Piaggio inner cables. This system allows the cable to move freely in the barrel when actioned.

Further information in our previous article about transmission cables.

The cable barrels with diameter Ø8 and height 9mm are perfect for all Vespa scooters except for PK, PK-S and PK-XL.

The cable barrels with diameter Ø9 and height 11mm fit all PK models before PK-XL2.

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply