Posts

Vespa Stoßdämpfer vorne bgm PRO SC Ccmpetition

Popular shock absorber for Vespa Oldies available again!

bgm offers HighEnd Vespa suspensions with TÜV for old and new Vespa models!

In this video e.g. someone enjoys the summer on his old Vespa T4 the Vespa shock absorber front bgm PRO SC COMPETITION.

Shock absorber front bgm PRO SC COMPETITION for Vespa Largeframe Rally, Sprint, GT/GTR, TS, GL, Super, VNA, VNB, VBA, VBB Wideframe V30-33, VM, VN, VL, GS150 / GS3, VB, ACMA(1952-), Hoffmann Queen

 

httpv://www.youtube.com/watch?v=Op–9cal-Xg

bgm PRO SC Competition Shock Absorber

The bgm PRO SC Competition shock absorber is a further development of the successful BGM PRO F16 Sport series. Optically the Competition series differs by the external expansion tank. This allows an even better response behaviour due to a larger volume compared to the sport shock absorber. At the same time the effective adjustment range of the damping has been increased.

FIELD OF APPLICATION Sport & Comfort

The Competition shock absorber has a different basic tuning compared to the sport shock absorber. Therefore it is very well suited for use with stiff sport springs like the new bgm PRO spring.

The rebound and compression settings also counteract the typical brake pitching, but also effectively counteract the rapid rebound in short bumps. This means that the Competition damper offers a lot of reserves even in high-performance vehicles. The wide range of suspension settings naturally also allows the use of a standard spring, which means that a comfortable ride is still possible with a soft damper adjustment.

 

INSTALLATION & OPTICS

Due to the optimized installation dimension of 165mm the damper fits without problems on all 8 inch models without pretensioning the spring or changing the angle of the swingarm. When mounted, the external expansion tank is largely covered by the fender, thus preserving the original look of the vehicle front. As with the F16 Sport series, the damper body is made of hard anodised aluminium. The damper is available in black and silver.

PRACTICAL SET

We also offer the bgm Competition shock absorber as a set with the bgm suspension spring which perfectly matches the reinforced shock absorber!

 

bgm Buy PRO shock absorber set

Vespa Stoßdämpfer vorne -BGM PRO SC COMPETITION- Vespa

BGM PRO SC COMPETITION – the new bgm PRO front shock absorber for Vespa

The BGM PRO SC Competition front shock absorber for Vespa is a further development of the successful BGM PRO F16 Sport series.

Optically, the Competition series differs from the previous one since it features an outer reservoir. The new front shock absorber for Vespa is available in black and silver as well as in a convenient set.

Front shock absorber -BGM PRO SC COMPETITION- Vespa Largeframe
Part number BGM7761B (black) / BGM7761S (silver)

Fits the following vehicles

Vespa

  • 150 Super (VBC1T)
  • 150 Sprint (VLB1T)
  • 150 Sprint Veloce (VLB1T)
  • 125 GTR (VLN2T)
  • 125 Super (VNC1T)
  • 125 GT (VNL2T)
  • 125 TS (VNL3T)
  • 180 Rally (VSD1T)
  • 200 Rally (VSE1T – Femsa)
  • 200 Rally (VSE1T – Ducati)
  • 150 (VBA1T)
  • 150 (VBB1T)
  • 150 (VBB2T)
  • 125 (VNA1T)
  • 125 (VNA2T)
  • 125 (VNB1T)
  • 125 (VNB3T)
  • 125 (VNB4T)
  • 125 (VNB5T)
  • 125 (VNB6T)
  • 125 (1949)
  • 125 (V15T)
  • 125 (V1T)
  • 125 (V30T)
  • 125 (V33T)
  • 98 1 (1946)
  • 98 2 (1946)
  • 98 3 (1947)
  • 98 4 (V98)
  • 150 (VB1T)
  • 150 (VL1T)
  • 150 (VL2T)
  • 150 GL (VLA1T)
  • 125 (VM1T)
  • 125 (VM2T)
  • 125 (VN1T)
  • 125 (VN2T)
  • 150 GS (VS1T)
  • 150 GS (VS2T)
  • 150 GS (VS3T) GS3
  • 150 GS (VS4T) GS3
  • 150 GS (VS51T) GS3
  • 125 U (VU1T)

 

 

Shock absorber with outer reservoir

The outer reservoir of the shock absorber increases the compensation volume and therefore it offers a much better response. Also the damping adjusting range has been increased.
The bgm PRO SC Competition shock absorber has a modified basic set-up and hence it can also be perfectly used in combination with rigid sport springs.

The compression and rebound adjustment prevents the diving effect or the rapid extension when wheels pass over bumps.

As a result, this shock absorber is also perfect for more powerful vehicles.
The wide range of damping adjustments allows you to use this shock absorber also in combination with a standard spring and with the right damping adjustment you can still have a comfortable ride.

 

Buy here the new Competition Vespa shock absorber

 

The new shock absorber also fits 8 and 10 inch wheels

Thanks to the optimised size, 165mm, this shock absorber perfectly fits also all 8-inch wheel models with no need to preload the spring or change the inclination of the fork link.

When mounted, the outer reservoir is covered by the mudguard and the front side of the Vespa keeps therefore its genuine look.

Like for the F16 Sport series, also this shock absorber is made of aluminium with hard-anodised finish, available in black and silver.