Posts

Tool check for Vespa Smallframe- mounting tool for primary drive -BGM PRO- BGM7905TL

, ,

Primary drive special tool for Smallframe

Add-ons like the right tools will simplify your work, won't damage the material and won't cause stress. We have a wide range of tools on offer for you. Starting with a simple feeler gauge ending with equipped tool trolleys.

To rebuild the entire engine of a Vespa scooter, you will need many things, for instance special tools. Handy tools like ours auxiliary stand, assembly aids or our multitool enhance fun while repairing or maintaining your scooter.

Non-damaging assembly

The mounting tool for primary drive wheels by BGM makes it possible to draw the large primary drive wheel into its bearing seat without causing any damage. It works on any Smallframe Vespa. The bushing of the assembly aid rests on the inner ring of the bearing only, which means that there won't be any pressure on the sensitive bearing surface, the bearing itself or engine casing.

06.01.2016 021

The tool was shaped in a way that there won't be any pressure on sensitive parts like the bushing made of gun metal or bearing of the primary drive wheel and the bearing seat of the 16005 in the engine casing.

06.01.2016 019

06.01.2016 005

Safe and easy handling

The mounting tool is safely and easily handled. Therefore it is practically impossible to damage engine casing, primary drive wheel or bearing during assembly.

Suitable for any primary drive of classic Smallframe models:

  • Vespa V50, V50N, V50L, V50R
  • Vespa PK50, PK50S, PK50XL, PK50XL2
  • Vespa V125, PV125, ET3
  • Vespa PK125, PK125S, PK125XL, PK125XL2
Buy tool for Vespa primary drive here

 

/0 Comments/by

Spring for primary drive -BGM PRO- Vespa Smallframe V50, Primavera, PK

,

More Power for Vespa Smallframe

The potential of Smallframe engines have been increasing during the past years and seem to increase even further.

Today you can find levels of performance and torque above 35HP / 30Nm more often. This, in turn, puts more sprain on other parts.

Vespa Sallframe Power

Springs for primary drive have to be stronger

Clutch and primary drive are crucial and highly strained links between crankshaft and drive. its weakest part are the springs of the jolt damping.

Buy reinforced BGM PRO springs for Vespa Smallframe here
These transmit the entire torque to the rear wheel, guarantee a symmetrical power transmission to the gearbox and smoothen the asymmetric flow of the crank drive between the dead centers. Not only in racing heavy crankshafts, lighter flywheels and immense load alterations shorts the tough life of the original springs.

New reinforced springs by BGM PRO

We added reinforced springs to our stock for you. These fit the BGM PRO repair kits BGM0190, BGM0192, MMW Hartz4/ 5 and they also fit the Original primary drive repair kits.

BGM0190F 002

The new BGM PRO springs provide more power

Comparing our springs to a Piaggio spring, you will see that the BGM spring is more elastic and the spring wire offers a larger deviation.

BGM0190F_Piaggio

A larger possible deviation and a higher spring constant protect the primary drive of sharp breaking parts, even in the toughest conditions.

Due to fitting conditions you cannot simply enlarge the spring to enhance its life span. Therefore we paid attention to use good material. Oteva is a highly robust spring steel, which is used for extremely dynamic loads. Its distinguishing characteristic is its durability at high temperatures during extreme mechanical use. Its surface is shot peened to further enhance durability.

 

BGM PRO BGM0190F spring for primary drive Vespa Smallframe

  • larger deviation
  • higher elasticity
  • original scales
  • material and processing for longer durability
  • fits many primary drives
Buy reinforced BGM PRO springs for Vespa Smallframe primary drive here
/0 Comments/by