Posts

Protect your scooter from theft

Customers whose scooters have been stolen call us for help over and over again. Most of the time it is about precious collector's items like the Vespa or Lambretta models. grip-lock-lock-test-good

Therefore, we want to point out once more that we have locks on offer. Unfortunately, you can never be 100% secure but it gives you a good conscience when parking your scooter with a lock system attached to it - even in your own garage / basement. Attach it to a chain and also an additional lock that makes it impossible to ride the scooter or push it away, eg the Grip lock - system that locks the throttle and the brake lever in braking position and blocks the front wheel.

Grip Lock test rating: GOOD

In the current issue of MOTORCYCLE (of 4 September 2015) in the advice section “Advice” you will find a report about the Grip lock “Tried it out”.
MOTORCYCLE rating: good

Grip Lock secure protection against theft for scooters
Grip-Lock is a long-life - high security lock

  • Suitable for almost everyone scooters
  • Cannot be picked with ordinary lock-picking devices
  • Very robust against drilling attacks
  • Maximum longevity and uncompromising security under all conditions
  • 3 year warranty

“Rollerszene” of the Syburger Verlag has already tested the Grip-Lock device, too:

"Of course, the grip lock is no alternative to a chain or a garage. Yet, it is small enough to be carried along at all times, it is easy to use and during short breaks it possibly gives you the decisive plus in security against theft. " Link to the complete article (in English)

GRIP LOCK security lock

For the brake and clutch levers

GRIP-LOCK security lock is probably the easiest and most effective way to secure your scooter, quad or motorcycle against theft.

  • Minimum packing dimension (easily fits into the glove box / toolbox / topcase / bag)
  • Fits almost all scooters, mopeds, motorcycles and ATV's. 27-38mm grip diameter
  • Impossible to forget taking it off, contrary to rim lock systems
  • Weight: only 330g
  • Dimensions: 15 × 4,5 × 4,5cm
Buy grip lock here

Lambretta front pinion - sprocket

New front pinion for Lambretta LI, LIS, SX, TV (series 2-3), DL, GP -

From now on we can offer you pins for your Lambretta from bgm PRO in perfect material and “made in Germany” quality.

The pinions are made from high-strength, heat-treated steel in degrees 16, 17, 18 and 19 teeth in one CNC piece.

The dimensions correspond to the original Innocenti, so that the chain line remains correct. The pins are labeled for easy identification. Thus the reduction ratio can be seen in the installed state without troublesome counting as it pulls straight to the rear wheel.

Pinion Lambretta BGM8012R19

Available with 16, 17, 18 and 19 teeth

Pinion Lambretta BGM8012R19

Here is a brief overview of the common combinations of pinion, chain wheel, matching chain and the position of the upper chain tensioner.

  • 15/46 - 80 - upper chain tensioner
  • 16/46 - 81 - lower chain tensioner
  • 17/46 - 81 - upper chain tensioner
  • 18/46 - 82 - lower chain tensioner
  • 19/46 - 82 - upper chain tensioner
  • 16/47 - 81 - upper chain tensioner
  • 17/47 - 82 - lower chain tensioner
  • 18/47 - 82 - upper chain tensioner
  • 19/47 - 83 - lower chain tensioner

Lambretta chain

Lambretta chain

We can offer you suitable chains from Iris in reasonable price range and Iwis in heavy duty quality.

In addition to the special tools required to replace the chain and the sprocket, you, of course, also need a

new fill of oil and seals for the oil fill and drain plug, and the transmission cover.

When changing oil, it is worthwhile to equip the gear cover directly with a sightglass - making the oil level in the gear always under control.

3330793 Lambretta gearbox oil screw