Set the Vespa ignition with a flash gun / strobe lamp
Adjust the Vespa ignition - but do it right!
Correct ignition timing is important for the thermal health of the engine:
- Reliability
- Longevity and
- full performance
Anyone who tunes their Vespa, rebuilds the engine or rebuilds it as part of a restoration should do it not on the existing markings rely on the motor housing, the pole wheel and the ignition base plate for ignition adjustment, but measure yourself and the Set the Vespa ignition correctly.
The correct setting of the ignition on your Vespa engine is electronic with these Ignition timing guns For petrol engines with contact or electronic ignition -> transistor ignition system (CDI ignition as in series with ET3, PK, PX, Cosa, T5 etc.) possible without any problems. Of course, this also works with the ignitions of the Lambretta with these ignition pistols also adjust the Lambretta ignition.
With these stroboscopic pistols, both old 6-volt and modern 12-volt ignitions can be set!
To the pilot light pistols in the shopIn this video tutorial Adjust the Vespa ignition we'll show you how Maryzabel and Alex set the ignition on ours Platonica Vespa have set:
Comparison of strobe pistols for Vespa & Lambretta
3 versions: large, small and with onboard or external battery
A super bright xenon tube and a special converging lens guarantee optimal visibility of the fixed marks with these ignition light pistols: even at speeds of over 8000 rpm in the near field range.
The gun is connected by means of an inductive clamp on the spark plug cable directly to the rubber insulation, without direct contact with the strand.
Our ignition timing guns are attached to the lens with a Rubber coating Mistake. This protector protects the plastic housing and the lens and ensures that you will enjoy the product for as long as possible.
1. Handy, mobile, operated with mono cells
Ignition light gun TRISCO-ProLITE (double-D) (- strobe light flash gun - ignition 6V / 12V
Article no.: MN911B
Es wird no external power supply needed. Two D batteries (Mono, LR20, MN1300) are used for the power supply; But you can order here at the same time.
In addition to being used as a pilot light gun, it can also be used as a work lamp!
- handy small
- Batteries on board
- Flashlight function
- Rubber protector
2. PROLITE version for the ambitious screwdriver
Ignition light pistol TRISCO-ProLite - strobe light flash pistol - ignition 6V / 12V
Article no.: MN922
This is the largest pistol that feels great in the hand. The cable with the two crocodile clips is a robust and practical spiral cable that is connected to a plug on the gun. Optimal pistol for the ambitious screwdriver and tuner - PROLITE version.
It will always be, regardless of whether it is a 6V or 12V ignition an external power source with 12 volts (e.g. a car battery) if the vehicle does not already have one.
- external 12 power source required
- practical spiral cable
- Cable separable from the housing / plug
- for the ambitious screwdriver
- Rubber protector
3. Handy and inexpensive 12V version
Ignition light pistol TRISCO-ProLite stroboscopic lamp flash pistol - ignition 6V / 12V
Article no.: MN912
For the occasional setting of the ignition, we have this light and handy TRISCO-ProLite ignition light gun in our range. It lies comfortably in the hand and of course also has the rubber protector. The cables are firmly connected to the gun body.
It will always be, regardless of whether it is a 6V or 12V ignition an external power source with 12 volts (e.g. a car battery) if the vehicle does not already have one.
- external 12 power source required
- for the hobby area
- cheap version
- Rubber protector