Adjust the Vespa ignition - but correctly!
The correct ignition timing is important for the thermal health of the engine:
- Reliability
- durability and
- full power delivery
Whoever tunes his Vespa, rebuilds the engine or rebuilds it in the course of a restoration, should not rely on the existing markings on the engine housing, the pole wheel and ignition base plate for ignition adjustment, but should measure it yourself and adjust the Vespa ignition correctly. The correct adjustment of the ignition on your Vespa engine is easily possible with these electronics ignition timing guns for petrol engines with contact or electronic ignition -> transistor ignition system (CDI ignition as in series for ET3, PK, PX, Cosa, T5 etc.) Of course this also works with the Lambretta ignitions. With these ignition pistols you can also adjust the Lambretta ignition. With these stroboscope guns you can adjust both old 6-volt and modern 12-volt ignitions!
To the ignition light guns in the shop In this video tutorial Vespa ignition adjustment we show you how Maryzabel and Alex adjusted the ignition on our Platonica Vespa: https://www.youtube.com/watch?v=ZDv-mouT_mk&t=11sComparison stroboscope ignition guns for Vespa & Lambretta
3 versions: large, small and with onboard or external battery
A super-bright xenon tube and a special converging lens guarantee optimum visibility of the fixed marks on these ignition light guns: even at speeds above 8000 rpm in the near field range. The pistol is connected by means of an inductive clamp on the spark plug cable directly to the rubber insulation, without direct contact to the stranded wire. Our ignition timing guns are equipped with a rubber coating on the lens. This protector protects the plastic housing as well as the lens and ensures the longest possible enjoyment of the product.
1. Cell phone, mobile, operated with mono cells
Ignition light gun TRISCO-ProLITE (double-D) (- strobe lamp flash gun - ignition 6V / 12V Article No .: MN911B 
No external power supply is required. For power supply two D batteries (Mono, LR20, MN1300) are used, these are not included! But you can order them right here. In addition to its use as an ignition light gun, it can also be used as a working lamp!
- small and handy
- Batteries on board
- Torch function
- Rubber protector
2. PROLITE version for the ambitious scooter tuner
Ignition light gun TRISCO-ProLite - stroboscopic lamp flash gun - ignition 6V / 12V Article No .: MN922 
This is the largest pistol that fits perfectly in the hand. The cable with the two crocodile clips is a robust and practical spiral cable connected to a plug on the gun. Optimal pistol for the ambitious screwdriver and tuner - PROLITE - version. No matter if 6V or 12V ignition, an external power source with 12 volts (eg a car battery) is always required, unless the vehicle already has one.
- external 12 power source required
- practical spiral cable
- Cable separable from housing / plug
- for the ambitious screwdriver
- Rubber protector
3. Handy and cheap 12V version
Ignition light gun TRISCO-ProLite stroboscopic lamp flash gun - ignition 6V / 12V Article No .: MN912 
For the occasional adjustment of the ignition we have this light and handy TRISCO-ProLite ignition light gun in our program. It lies well in the hand and of course also has the rubber protector. The cables are firmly connected to the housing of the pistol. No matter if 6V or 12V ignition, an external power source with 12 volts (eg a car battery) is always required, unless the vehicle already has one.
- external 12 power source required
- for the hobby area
- cheap version
- Rubber protector
