Posts

Plan / drawing for baseboards original Innocenti Lambretta

Lambretta footboard stripes from Casa Lambretta

Casa Lambretta footboard strip sets Li family

The supply of spare parts for the Lambretta is probably better today than it has been for fifty years. The range of parts from various manufacturers is getting bigger and more colorful.

We remember with horror the supply of spare parts at the time we did it Scooter Center Started in 1992. Even if the parts did fit, the gray tones of the rubber parts of a series 3, for example, changed from whitish yellow to anthracite. Supplying series 1 and 2 parts was hard to imagine.

We are Casa Lambretta dealers for Germany

Scooter Center Team with Vittorio Tessera

Fortunately, we have been since the beginning of the new millennium Casa Lambretta dealer for Germany. A nice report on the history of Victor Tessera and Casa Lambretta can be found in the November and December 2017 issue of Scootering. The report is currently also available online:

https://www.scootering.com/scootering-classics-story-of-vittorio-tessera/

There is an outline of the history of Casa Lambretta, which began in 1979/80. So not that long after the end of production of the dl / GP series. The parallel between Vittorio's experiences with Lambretta in the early days and those of the Lambretta drivers in the early nineties is particularly beautiful. Where a minority had to acquire a thick skin to justify the Lambretta. But we seem to digress ...

Actually, it's about the step rails from Casa Lambretta for the Li family. Let's do it chronologically.

Lambretta TV 175 Series 1

It's very easy for the TV 175 Series 1. For the top model from Innocenti, which was built around 10.000 times between 1957 and 1958, there is the

Lambretta LI series 1

With the Li series 1 there is a distinction between the 125 cc and the 150 cc models. The Li 125 comes with continuous aluminum strips at the front and the gray plastic strips on the running boards:

The Li 150 Series 1 has aluminum strips at the front, into which rubber tread strips are inserted and which are closed off by the tread strip end pieces:

Lambretta LI & TV Series 2

After more than 150.000 series 1 Lambrettas have been built, the series 2 is the successor. The solution for the gradation of the models by - among other things - the step rails is retained. The TV 175 Series 2 gets the same floor strips and end pieces as the Li 150.

Lambretta LI series 3

With the Series 3 it's very easy. Here, all models get the same set of steps made of plastic in gray, paired with inner aluminum strips with rubber inlay and step rail end pieces as a finishing touch:

Lambretta dl/GP

In the case of the dl / GP series, in addition to the color - black instead of gray - only the design of the treadboard end pieces and of course the specific lengths at the front for the other leg shield of the dl / GP compared to series 3 changes:

Built according to original Innocenti plans

Plan / drawing for baseboards original Innocenti Lambretta

The nice thing about the Casa Lambretta parts is next to that excellent quality the fact that many parts after the original Innocenti drawings are manufactured. The correct mounting material is included in the scope of delivery.

Made with original tools

Machine / tool for baseboards original Innocenti Lambretta

In the case of the plastic step strips for Series 3, the attention to detail can go a little further. They are cast on the original tools by one of the original manufacturers for Innocenti. So they correspond exactly to the original in every aspect. Also with regard to the corrugation on the top. An advantage that should not be underestimated for an accurate restoration.

Philip
Scooter Center

Lambretta seat covers from Casa Lambretta

Scooter Center goes Italy - 4 Casa Lambretta & Lambretta Museum

/0 Comments/by