Air filter insert bgm for Motovespa air filter
The identical air filter inserts are fitted to many Motovespa Largeframe models. Often this important component for the protection of the engine is missing or is no longer in a usable condition. For this reason, we have produced a high-quality air filter insert for the Spanish licensed versions of the Vespa Largeframe models.
Air filter fleece bgm PRO for Motovespa Largeframe
High quality filter fleece from Marchald (Italy), manufactured for bgm PRO. Suitable for the direct-intake engines (carburettor sits directly on the cylinder) of the Largeframe Motovespa engines.
- 1:1 replacement for the original wire mesh.
- Significantly better and finer filtration with higher air flow at the same time.
- Therefore also ideal for already performance-enhanced engines.
Installation instructions for the Motovespa air filter element
Replacing the air filter element is very easy. After removing the right side cover, the air filter box is immediately visible.
Open and remove the air filter box
The cover is fixed with two M5 screws. These can be loosened with a size 5 to 6 flathead screwdriver.
The air filter of the Motovespa
After removing the two screws, the cover can simply be lifted off. Here, in our example, the original air filter insert of the Motovespa is no longer present!
Attaching the air filter element
The air filter insert has no installation orientation and can simply be pushed onto the filter housing from above.
Closing the air filter box
The remaining protrusion of the air filter insert seals towards the air filter box cover when mounted. Refit the cover of the air filter box with the two screws, refit the side cover and the change is complete.
Air filter cleaner and oil
To achieve an even higher filter performance, the air filter insert can be used with air filter oil. However, this is not absolutely necessary due to the high-quality filter material of the bgm PRO filter.